RF Modules Australia - SENA Parani Bluetooth Serial Modules and Adapters

The Parani-SD200 is a class 2 type Bluetooth serial adapter designed to replace RS-232 serial cables with wireless connectivity when interconnecting peripheral devices. DC Power adapter included. Optional battery pack is not included by default.
.

Parani-SD200

Part Number:
Parani-SD200-B10

● User Manual (PDF)

● Accessories

*DC Power Cable and OPA power adapter included.
*Does not include Optional Battery Pack.

Features:

       ● Provides transparent RS232 serial cable replacement
       ● Supports Bluetooth 1.2 stack - improved AFH, Fast connection
       ● Parani-SD100 : Nom. 100 meters, up to 1000m using patch antenna
       ● Parani-SD200 : Nom. 30 meters, up to 300m using patch antenna
       ● Supports Bluetooth profiles SPP (Serial Port Profile)
       ● Interoperability with PDA, laptops etc.
       ● Supports firmware upgrade via windows-based software (ParaniUpdater)
       ● Parani-SD200 : Supports battery pack (Two AA battery)
       ● Enhanced portability : standard & extended battery pack options
       ● Easy to use Windows configuration tool available.
       ● No external drivers required.

Specifications:

	Parani-SD100	Parani-SD200	Parani-SD200L
CPU	RS232, Female DB9, 1200 bps ~ 230 Kbps
	CTS/RTS flow control: Default
	DTR/DSR for loop-back & full transfer
Bluetooth Interface	Bluetooth v1.2 Class 1 Level - 18 dBm Protocols - RFCOMM, L2CAP, SDP Profiles - General Access Profile, Serial Port Profile Working distance Default Antenna - Default Antenna 100 meters Default Antenna - Dipole Antenna 150 meters Dipole Antenna - Dipole Antenna 200 meters Patch Antenna - Dipole Antenna 400 meters Patch Antenna - Patch Antenna 1,000 meters	Bluetooth v1.2 Class 2 Level - Max. 4dBm Protocols - RFCOMM, L2CAP, SDP Profiles - General Access Profile, Serial Port Profile Working distance Default Antenna - Default Antenna 30 meters Default Antenna - Dipole Antenna 50 meters Dipole Antenna - Dipole Antenna 80 meters Patch Antenna - Dipole Antenna 150 meters Patch Antenna - Patch Antenna 300 meters
Max. Tx power	+18dBm	+4dBm
Receive Sensitivity	-88dBm	-80dbm
Antenna gain	Stub : +2dBi, Dipole : +3dBi, Patch : +9dBi
Configuration	ParaniWin, ParaniUpdater
	Modem AT command set
Diagnostic LED	Power Standby Connect RS232-Tx RS232-Rx
Power	- 5~12VDC - Nominal current consumption : SD100 : 100mA @ 5.0Vdc approximately SD200 : 70mA @ 5.0Vdc approximately		- 5Vdc / 2A SMPS Adapter - Nominal current consumption : SD200L : 70mA @ 3.7Vdc approximately
	Common Power supply options Power via a standard AC-plug DC-adapter Power via USB power cable Power via DC power cable Power via pin 9 of DB9 connector Battery Pack for SD200 only Internal Battery for SD200L only
Battery Usage Time	- When using battery pack for SD200 : Typical 1.5V -AA alkaline batteries (2500mAh) - Avg. 11hr@9600bps - When using internal battery for SD200L : Battery - 3.7V / 190mAh Operating Time - up to 3hour Charging Time - within 2hour Note : Depending on the batteries and its usage environment greatly determines how long the Parani product will last for their application, i.e.battrery storage, battery capacity, battery brand and so on.
Environmental	Operating temperature: -10'C to 55'C
	Storage temperature: -20'C to 70'C
	Humidity: 90% Non-condensing
Physical Properties	Dimension (LxWxH) 96 x 31 x 16 (mm) 3.77 x 1.22 x 0.62	Dimension (LxWxH) 101 x 31 x 16 (mm) 3.93 x 1.22 x 0.62 (in.)	Dimension (LxWxH) 96 x 31 x 16 (mm) 3.77 x 1.22 x 0.62 (in.)
	Weight: 26g	Weight: 24g	Weight: 30g
MTBF	121.74 Years	394.4 Years	-
Regulatory Approvals	FCC Part 15 Subpart C Section 15.247 FCC Part 15 Subpart B ETSI EN 300 328 ETSI EN 301 489-1 ETSI EN 301 489-17 EN61000-3-2, EN61000-3-3 EN60950-1 MIC TELEC		FCC Part 15 Subpart C Section 15.247 FCC Part 15 Subpart B
SIG QDID	B012393	B012405	-
Warranty	3-year Limited Warranty

*Parani-SD200L NOT Available in Australia