Embedded Device Server
Nemo10 Eval Kit

RF MODULES AUSTRALIA

 
 
 

MANUFACTURERS

 
 
 

PRODUCTS

 
 
 


*Conditions Apply

 
 

Nemo10-SK - Embedded Device Server

The Nemo10 is a compact and low-cost embedded device server that is designed for OEM users who are wishing to embed Ethernet connectivity directly onto the circuit boards of equipment like security systems, POS, factory machinery, and medical devices. The Nemo10 device server has a standard pin space with a dual-in-line, 24-pin design for onboard installation that lets you shorten the layout time and get your product to market in no time.
.

 

Nemo10-SK Embedded Device Server Evaluation Kit


Part Number:
  Nemo10-SK

 
User Manual (PDF)
 
Datasheet (PDF)
 

Downloads

 

 

Features:

       ●  Single-chip DIL type Ethernet controller for onboard installation.
       ●  Compact size 45mm x 45mm x 18.5mm.
       ●  Built-in UART for device interface, data transfer rate up to 115Kbps.
       ●  Supports 10Base-T Ethernet interface.
       ●  Supports ARP, IP/ICMP, TCP, Telnet, DHCP, PPPoE
       ●  Reliable TCP/IP protocol stack.
       ●  PPPoE protocol for DSL connection to broadband network.
       ●  Configuration using Telnet or Config command via serial interface.
       ●  Management software for configuration and administration.
       ●  +5v Input, 0.3w low power consumption.

Pin Assignment:

Nemo10-SK Layout:

Installation of the Nemo10 onto the Nemo10-SK (Starter Kit):

 

Specifications:
 

  Nemo10
Hardware 80C51 8-bit microprocessor
32KB SRAM
64KB EEPROM
External Interface Pins 24 pin Dual In Line connector interface for
  • UART
  • LED
  • Ethernet
  • Power
Device Interface Built-in UART
Serial speeds 1200bps to 115Kbps
Flow Control: Hardware RTS/CTS
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
Network Interface 10 Base-T Ethernet
Supports static and dynamic IP address
Protocols ARP, IP/ICMP
TCP
Telnet
DHCP client
PPPoE
Security User ID & Password
Management
  • Telnet
  • Serial console port
  • HelloDevice Manager
Power Supply voltage = 5V DC 10%
Supply current = 60mA / 5V DC
Environmental Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 66°C
Humidity: 90% Non-condensing
Physical Properties Dimension (LxWxH)
45 x 45 x 18.5 (mm)
1.8 x 1.8 x 0.7 ( in.)
Weight: 20g
Warranty 1-year Limited Warranty