|
*Conditions Apply |
|
|
|
Nemo10 - Embedded Serial Device Server |
|
|
|
The Nemo10 is a compact and low-cost
embedded device server that is designed for OEM users who are
wishing to embed Ethernet connectivity directly onto the
circuit boards of equipment like security systems, POS,
factory machinery, and medical devices. The Nemo10 device
server has a standard pin space with a dual-in-line, 24-pin
design for onboard installation that lets you shorten the
layout time and get your product to market in no time.
. |
|
|
|
|
|
|
|
Features:
● Single-chip DIL type Ethernet controller for onboard
installation.
● Compact size 45mm x 45mm x 18.5mm.
● Built-in UART for device interface, data transfer
rate up to 115Kbps.
● Supports 10Base-T Ethernet interface.
● Supports ARP, IP/ICMP, TCP, Telnet, DHCP, PPPoE
● Reliable TCP/IP protocol stack.
● PPPoE protocol for DSL connection to broadband
network.
● Configuration using Telnet or Config command via
serial interface.
● Management software for configuration and
administration.
● +5v Input, 0.3w low power consumption.
|
|
Pin Assignment:
|
| Specifications:
|
|
| |
Nemo10 |
|
Hardware |
80C51
8-bit microprocessor |
| 32KB SRAM |
| 64KB
EEPROM |
| External
Interface Pins |
24 pin Dual In Line
connector interface for
|
|
Device Interface |
Built-in
UART |
| Serial
speeds 1200bps to 115Kbps |
| Flow
Control: Hardware RTS/CTS |
| Signals:
Rx, Tx, RTS, CTS, DTR, DSR, GND |
|
Network Interface |
10 Base-T
Ethernet |
| Supports
static and dynamic IP address |
| Protocols |
ARP, IP/ICMP
TCP
Telnet
DHCP client
PPPoE |
|
Security |
User ID & Password |
|
Management |
- Telnet
- Serial console port
- HelloDevice Manager
|
|
Power |
Supply
voltage = 5V DC 10% |
| Supply
current = 60mA / 5V DC |
|
Environmental |
Operating
temperature: 0°C to 50°C |
| Storage
temperature: -20°C to 66°C |
| Humidity:
90% Non-condensing |
|
Physical Properties |
Dimension
(LxWxH)
45 x 45 x 18.5 (mm)
1.8 x 1.8 x 0.7 ( in.) |
| Weight:
20g |
| Warranty |
1-year
Limited Warranty |
|
|
|
|
|
|
|
|
|
|
Copyright © 2009.
RF Modules Australia. All rights reserved. |
